2 Inches 52mm Car Fuel Level Gauge with Fuel Float Sensor Electronic LED Display Automotive Modification Gauge for 12V/24V Cars
Item Description:
This fuel level gauge has a delay function circuit that does not cause flickering of the LED display because the tank is sloshing during driving. Blue LED can be clearly shown in strong sunlight.
The gauge is fit to a resistance type fuel level sensor, and the measuring range of the sensor is ≤ 2KΩ.
It can be adjusted to fit your car.
Introduction:
Band: SincoTech
Model:611F
Display:Electronic
Screen Size:2 inches（52mm）
Sensor Resistance：240-33Ohm
Application Range:All 12V/24 Vehicles
Operating Voltage:9V-36V
Warranty Period: 1 Year
Wiring instructions:
① Red wire: connected to ignition switch ACC
② Green line: fuel level sensor signal line
③ Black wire: battery negative electrode
Setting description:
①Press and hold the key for 3 seconds to enter the low oil level setting: the lowest LED flashes. At this time, push the oil sensor to the lowest position and press the key once (set the lowest oil level value).
②The gauge enters the high oil level setting: the highest LED flashes. At this time, push the oil sensor to the highest position and press the key once (set the highest oil level value).
③The gauge enters the normal working mode after completing the setting: the LED scans from the lowest position to the highest position once and then enters the normal working mode to display the current fuel level.
Fitment:
Universal Fit for 12V/24V Cars
Package Included:（Note: Available with and without fuel float version，Please choose whether you need a sensor according to your needs）
①: Fuel Level Gauge without Sensor
1 * Power Cable
1 * Fuel Level Gauge
②:Fuel Level Gauge with Sensor
1 * Power Cable
1 * Fuel Level Gauge
1 * Fuel Level Transmitter
1 * Oil Float
1 * Rubber Pad
1 * Bolts Pack
You may choose whether to purchase an oil float as needed.