0102030405
52mm Boost Tachometer Voltmeter Water Oil EGT Temp Oil Pressure Gauge - China Suppliers Factory with 7 Colors Backlight
Specification
🔴 Tachometer: 0~10×1000 RPM
💨 Booster Gauge: -30~30 PSI
🌡️ Water Temperature: 40~140℃
🔥 Oil Temperature: 40~140℃
🛢️ Oil Pressure: 0~100 PSI
⚡ Voltmeter: 8~18V
⚙️ Air Fuel Ratio: 20:1~10:1
🌡️ Exhaust Temp: 3~13×100℃
⚠️
Important Note
These gauges use stepper motors and need to be powered on to return to zero. It is normal that the pointer does not return to zero when powered off.
Tachometer (RPM Meter)
- 1 × Tachometer
- 1 × Wire
- 1 × English Manual
Boost Gauge
- 1 × Boost Gauge
- 1 × Boost Sensor
- 1 × PVC Hose (6 Feet)
- 1 × T-Fitting
- 1 × Wire
- 1 × English Manual
Water Temp Gauge
- 1 × Water Temp Gauge
- 1 × Water Temp Sensor (1/8 ZG)
- 1 × Wire
- 1 × English Manual
Oil Temp Gauge
- 1 × Oil Temp Gauge
- 1 × Oil Temp Sensor (1/8 ZG)
- 1 × Wire
- 1 × English Manual
Oil Pressure Gauge
- 1 × Oil Pressure Gauge
- 1 × Electronic Oil Press Sensor (1/8 ZG)
- 1 × Wire
- 1 × English Manual
Voltmeter
- 1 × Voltmeter
- 1 × Wire
- 1 × English Manual
Air Fuel Ratio Gauge
ℹ️ Note: The gauge does not contain an oxygen sensor. | Oxygen sensor type: Narrow band | Output voltage: 0~1 V
- 1 × Air Fuel Gauge
- 1 × Wire
- 1 × English Manual
Exhaust Temperature Gauge (EGT Gauge)
- 1 × Exhaust Temperature Gauge
- 1 × EGT Sensor (Thread size: 1/8 NPT)
- 1 × Wire
- 1 × English Manual
Frequently Asked Questions
FAQ
Q
Why doesn't the pointer return to zero when the gauge is powered off?
These gauges use stepper motors, which require power to reset the pointer to the zero position. It is completely normal for the needle to remain at its last position after the power is turned off. Once powered on again, the gauge will automatically return to zero.
Q
Does the Air Fuel Ratio Gauge come with an oxygen sensor?
No, the Air Fuel Ratio Gauge does not include an oxygen sensor. It is compatible with narrow-band oxygen sensors with an output voltage of 0~1V. You will need to purchase a compatible oxygen sensor separately if required.
Q
What thread size is the EGT sensor, and is it compatible with my vehicle?
The EGT (Exhaust Temperature) sensor uses a 1/8 NPT thread size. This is a standard thread size used in many aftermarket and performance vehicle applications. Please verify your vehicle's exhaust port thread size before installation.
Q
What thread size are the Water Temp and Oil Temp sensors?
Both the Water Temperature Sensor and the Oil Temperature Sensor use a 1/8 ZG thread size. Please ensure your vehicle has a compatible port, or use an appropriate adapter fitting for installation.
Q
Do all gauges come with installation instructions?
Yes, every gauge in this range comes with a printed English Manual to guide you through the installation process. If you require additional support, please refer to the product listing or contact the seller directly.
Q
What is the measurement range of the Boost Gauge, and does it support both vacuum and pressure readings?
Yes, the Boost Gauge has a measurement range of -30 to +30 PSI, which covers both vacuum (negative pressure) and boost (positive pressure) readings. This makes it suitable for both naturally aspirated and turbocharged/supercharged engine applications.